Compression Set Liner Top Packer with Integrated Slip

The compression set liner Top packer that utilizes the High-Performance Packing Element design. The Packing element is actuated by applying set-down weight to the tieback extension via the setting dogs on the liner setting tool. This setting force drives a cone under the Slip causing it to expand and conform to the casing ID. The packing element will squeeze and seal off any extrusion gap, a body lock ring system holds a permanent set in the seal once actuated. The packer will provide an effective annular seal between the top of the liner and the casing, thus preventing possible formation breakdown, loss of cement slurry and gas migration above the liner top during cement cure. Hold down slips are available to prevent upward movement of the liner and suitable for horizontal wells. The Liner Hanger System has integral setting collar to rotate the Liner Hanger during running in and cementing.

The Compression Set Liner Top Packers of Completion Oil Tools are available in three versions:

1. Compression Set Without slip Liner Top Packer, Product no. CT90901, Model: CT-CLTP
2. Compression Set Integrated Slip Liner Top Packer, Product no. CT90904, Model: CT-CLTP-IS

Features & Advantages:

Type I, II and III Tieback are available in 10′, 15′ and 20′ lengths. PBR-type sleeves are available on request.
Hold down slips available to prevent floating of short liners
Packing Element design will not swab off Allows higher circulating rates for better mud removal Permits faster running speeds, greatly reducing tripping time.
Seal System rated at 10,000 psi @ 400°F. (In Most Sizes).
Ideally suited for HP/HT applications.
Integral setting collar provided with packer to rotate the hanger.
Internal dia. equals to the corresponding liner weight.

Rotating Ball Seat Sub

Model No.: CT-RBS Product No.: CT-91801 Rotating Ball Seat Sub eliminates the extreme impact of shearing out a ball seat at the bottom of the liner which could possibly breakdown sensitive formations. Features: Full-bore clearance after ball seat shears High-inclination wells Design that ensures that the ball is dislodged as the ball seat shears. Design […]

Casing / Liner Swivel Sub

Model No.: CT-CSS Product No. CT-93401 Completion Oil Tools® Casing Swivel Sub is normally used when running mechanical set liners in highly deviated wells in which rotating to set the liner may be problem. The Liner Swivel Sub allows rotation of the hanger without having to rotate the total Liner. A Clutch system in the […]

CT-PRT® Solo Plug Running Tool

The Solo Plug Running Tool has been designed in order to increase the reliability and improve the performance of current single plug offerings. The plug incorporate- rates multiple fins, similar to long string plugs that improve upon the wiping ability of current plugs. The attachment mechanism is now a collet as op- posed to shear […]

Junk Cover

Model No.: CT-JNCProduct No.: CT92701 The COT® Model “CT-JNC” liner hanger junk screen should be run as part of the setting tool assembly to prevent debris from damaging the polished bore Tieback Receptacle. It will also prevent debris from setting on top of the setting tool and ease of retrieval. The Junk Cover is installed on […]

Junk Screen

Model No.: CT-JC Product No.: CT-92701 The COMPLETION OIL TOOLS® Model “CT-JC” liner hanger junk cover should be run as part of the setting tool assembly to prevent debris from damaging the polished bore Receptacle. Junk Screen will also prevent debris from setting on top of the setting tool and ease of retrieval. Rotating Ball […]

HTPS® Hydro Trip Pressure Sub

Model No.: CT-HTPS® Product No.: CT-93601 The Model Hydro Trip Pressure Sub is a pressure actuated device installed in tubing string below a hydrostatically actuated tool such as a packer. It provides a method of applying pressure to activate and set the packer and then through continued pressure, activate the Hydro Trip Sub. Packer is […]

Swab Cup Packer

Model No.: CT-SCP-MProduct No.: CT-92802 The Swab Cup Assembly is installed in the run-in string below the liner running tools (typically below RPB®). The Swab Cup Assembly Seat provides a means to temporarily plug the liner running string. Rotating Ball Seat Sub Model No.: CT-RBS Product No.: CT-91801 Rotating Ball Seat Sub eliminates the extreme impact of […]

Swab Cup Assembly

Model No.: CT-SCP Product No.: CT-92801 The Swab Cup Assembly is installed in the run in string below the liner running tools (typically below RPOB). The Swab Cup Assembly Seat provides a means to temporarily plug the liner running string and allow hydraulic pressure to be applied to hydraulically set liner hangers and release HRRT Running Tools. […]

Swab Cup Assembly with Yieldable Ball Seat

Model No: CT-SCP-YSProduct No.: CT-92803 The Swab Cup Assembly with Yieldable Ball Seat is installed in the run-in string below the liner running tools (typically below RPB®). The Swab Cup Assembly with Yieldable Ball Seat provides a means to temporarily plug the liner running string and allow hydraulic pressure to be applied to hydraulically set […]

Tubing Swivel Sub

Model No.: CT-TSS Product No.: CT-93402 Completion Oil Tools® Swivel Sub is designed for upper string rotate freely and lower string remains Static. Tubing Swivel Sub is normally used where Mechanical Set Liner Hanger run in a highly deviated or horizontal wellbore. This tool is designed with high load roller bearings which ensure the tool […]

Drill Pipe Wiper Plug

Model No.: CT-DPWP Product No.: CT-92301 COMPLETION OIL TOOLS® Drill Pipe Wiper Plug is used to wipe the inside of drill pipe and running tools behind the cement, providing a mechanical barrier between the cement and spacer fluid. The CT-DPWP is launched from the cementing head and is displaced through the drill pipe and running tools […]

Casing Wiper Plug

Model No.: CT-CLWP Product No.: CT-92101 COMPLETION OIL TOOLS® Model Casing/liner wiper plug is used to displace cement through the ID of a liner. The CT-CLWP is compatible with COMPLETION OIL TOOLS Hydraulic Landing Collar (CT-HLC) and Drillable Landing Collar (CT-DCL). It has an extremely good record of displacing cement and bumping in the landing collar […]

Polished Bore Receptacle

Model No.: CT-PBR Product NO.: CT-91401 COMPLETION OIL TOOLS® Polished Bore Receptacle has a honed polish seal bore which is used to tying in to liner with COT® Tie back seal mandrel or by tie back packer . The CT-PBR also provides the extension which is later used for setting liner top packer. It is […]

Setting Sleeve For HRT-E

Model No.: CT-SS-HR Product No.: CT-91501 The COMPLETION OIL TOOLS Model Setting Sleeve for HRRT-E Running Tool offers a HR profile to run the string with running tool, Setting Sleeve having internal Receptacle profile for RPB™ (Retrievable Pack off Bushing) and Box down thread for connecting with Liner Top Packer or Integrated Packer with Hanger. Rotating […]

Setting Collar For RTRM Running Tool

Model No.: CT-SS-N Product No.: CT-91508 The COMPLETION OIL TOOLS Model Setting Sleeve for RTRM Running Tool offers a Running Nut to run the string with running tool, Setting Sleeve having internal Receptacle profile for RPB™ (Retrievable Pack off Bushing) and Box down thread for connecting with Liner Top Packer or Integrated Packer with Hanger. Rotating […]

Setting Sleeve

Product No.: CT91501 Setting Sleeve can be provided with RH Profile to run the string with CT-CRT running tool, setting collar having Internal Receptacle profile for RPB® retrievable pack off bushing. Rotating Ball Seat Sub Model No.: CT-RBS Product No.: CT-91801 Rotating Ball Seat Sub eliminates the extreme impact of shearing out a ball seat at […]

Hydraulic Latch Landing Collar With Catcher Sub

Completion Oil Tools® Landing Collar provides a means to both set hydraulic tools and to catch a liner wiper plug in a string of pipe. Features & Benefits: Ceramic Ball Seat – A ceramic insert has been incorporated into the ball seat of most standard sizes in order to eliminate erosion of the critical sealing […]

Landing Collar Latch Type

Model No.: CT-LCL Product No.: CT-91703 COMPLETION OIL TOOLS® Landing Collar provides Latch down seat and seal for the liner wiper plug, and provides an additional back up to the float collar and shoe to ensure that cement remains in place after displacement. The landing collar is normally run one or two joints above the […]

Latch Type Landing Collar

Model No.: CT-HLC Product No.: CT-91701 COMPLETION OIL TOOLS® Model “CT-HLC” Landing Collar provides Latch down seat and seal for the liner wiper plug, and provides an additional back up to the float collar and shoe to ensure that cement remains in place after displacement. The landing collar is normally run one or two joints […]

DPB® Nipple With Drillable Pack Off Bushing

a) Nipple With Drillable Pack off BushingModel No.: CT-NDPBProduct No.: CT93503 b) Nipple With Drillable Pack off Bushing (DPB®) With Flapper Valve Model No.: CT-NDPB-FProduct No.: CT93504 The Flapper Valve Assembly DPB® (Drillable Pack-off Bushing) provides a method of sealing off the liner top to allow for cementing. It is generally run directly below the liner top […]