Category: Accessories

ADJUSTABLE SUB WITH ROTATIONAL LOCK

Bridge Plug ADJUSTABLE SUB WITH ROTATIONAL LOCK Product Description The COT Adjustable Sub with rotational lock an in-line tubing device designed to provide orientation between two sets of tubing assemblies. Typical uses are alignment of two downhole tubing units such as dual string packers or tubing to hanger make-up. Once alignment is set, the swivel […]

Rotating Ball Seat Sub

Bridge Plug Rotating Ball Seat Sub ⚙ Model No. CT-RBS 📋 Product No. CT-91801 Product Description Rotating Ball Seat Sub eliminates the extreme impact of shearing out a ball seat at the bottom of the liner which could possibly breakdown sensitive formations. Features: Full-bore clearance after ball seat shears High-inclination wells Design that ensures that […]

Casing / Liner Swivel Sub

Casing / Liner Swivel Sub ⚙ Model No. CT-CSS 📋 Product No. CT-93401 Product Description Completion Oil Tools® Casing Swivel Sub is normally used when running mechanical set liners in highly deviated wells in which rotating to set the liner may be problem. The Liner Swivel Sub allows rotation of the hanger without having to […]

CT-PRT® Solo Plug Running Tool

CT-PRT® Solo Plug Running Tool Product Description The Solo Plug Running Tool has been designed in order to increase the reliability and improve the performance of current single plug offerings. The plug incorporate- rates multiple fins, similar to long string plugs that improve upon the wiping ability of current plugs. The attachment mechanism is now […]

Junk Cover

Junk Cover ⚙ Model No. CT-JNC 📋 // Product No. CT92701 Product Description The COT® Model “CT-JNC” liner hanger junk screen should be run as part of the setting tool assembly to prevent debris from damaging the polished bore Tieback Receptacle. It will also prevent debris from setting on top of the setting tool and […]

Junk Screen

Junk Screen ⚙ Model No. CT-JC 📋 // Product No. CT-92701 Product Description The COMPLETION OIL TOOLS® Model “CT-JC” liner hanger junk cover should be run as part of the setting tool assembly to prevent debris from damaging the polished bore Receptacle. Junk Screen will also prevent debris from setting on top of the setting […]

HTPS® Hydro Trip Pressure Sub

HTPS® Hydro Trip Pressure Sub ⚙ Model No. CT-HTPS 📋 // Product No. CT-93601 Product Description The Model Hydro Trip Pressure Sub is a pressure actuated device installed in tubing string below a hydrostatically actuated tool such as a packer. It provides a method of applying pressure to activate and set the packer and then […]

Swab Cup Packer

Swab Cup Packer ⚙ Model No. CT-SCP-M 📋 // Product No. CT-92802 Product Description The Swab Cup Assembly is installed in the run-in string below the liner running tools (typically below RPB®). The Swab Cup Assembly Seat provides a means to temporarily plug the liner running string.

Swab Cup Assembly

Swab Cup Assembly ⚙ Model No. CT-SCP 📋 // Product No. CT-92801 Product Description The Swab Cup Assembly is installed in the run in string below the liner running tools (typically below RPOB). The Swab Cup Assembly Seat provides a means to temporarily plug the liner running string and allow hydraulic pressure to be applied […]

Swab Cup Assembly with Yieldable Ball Seat

Swab Cup Assembly with Yieldable Ball Seat ⚙ Model No. CT-SCP-YS 📋 // Product No. CT-92803 Product Description The Swab Cup Assembly with Yieldable Ball Seat is installed in the run-in string below the liner running tools (typically below RPB®). The Swab Cup Assembly with Yieldable Ball Seat provides a means to temporarily plug the […]