Author: admin

HYDRO-MECHANICAL BRIDGE PLUG

Bridge Plug HYDRO-MECHANICAL BRIDGE PLUG ⚙ Model No. CT- HMBP 📋 Product No. CT-95704 Product Description The Hydro-Mechanical Bridge Plug is a drillable bridge plug, which utilizes a built-in hydraulic chamber to begin the setting process FEATURES: Hydraulic actuated mechanical set. Slim line design. Full tubing ID after releasing, if rotationally released. Tubing released by […]

MECH-PAC® VII Mechanical Set Production Packer

Bridge Plug MECH-PAC® VII Mechanical Set Production Packer ⚙ Model No. CT- MH 7 📋 Product No. CT-95307 Product Description MECH-PAC VII Tension Set Mechanical Packer provides a compact, economical retrievable packer for use where a set-down type packer is impractical because of pressure requirements. Primarily Used in water flood applications, this packer can also […]

COT® HYDRO-SET VI PRODUCTION PACKER

Bridge Plug COT® HYDRO-SET VI PRODUCTION PACKER ⚙ Model No. CT-HYDRO 6 📋 Product No. CT-95208 Product Description “CT-HYDRO-6” packer was specially designed with in-built straight pull release and rotational release feature which makes it advantageous to the operator as it nullify the requirement of high capacity rig hence improves cost savings. FEATURES: Bi-directional Barrel […]

Liner Hanger Packer

Bridge Plug Liner Hanger Packer Product Description ENHANCED PRESSURE RATING – The hanger is designed to withstand high pressure and temperature conditions. The dual tapered ribs slips provide additional strength to the hanging capacity of the hanger, ensuring reliable performance in demanding environments. ANTI-PRESET FEATURE – Present at both top and bottom of hanger avoiding […]

LHM® Mechanical Set Liner Hanger

Bridge Plug LHM® Mechanical Set Liner Hanger ⚙ Model No. CT-MSLH-IP 📋 Product No. CT-90601 ⚙ Model No. CT-MDLH-IP 📋 Product No. CT-90602 Product Description The Mechanical Liner Hanger (LHM®) with Integrated Packer provides a method for hanging a liner off bottom and in tension by anchoring the top of the liner in previous casing. […]

Conventional Mechanical Liner Hanger

Bridge Plug Conventional Mechanical Liner Hanger ⚙ Model No. CT-MSLH-1 📋 Product No. CT-90601 ⚙ Model No. CT-MSLH-2 📋 Product No. CT-90602 Product Description Conventional Mechanical liner can be set with either right or left- hand rotation, depending on the type of setting tool or design. Staggered cone provides maximum bypass area which results in […]

“S” Pulling Tool

Bridge Plug “S” Pulling Tool ⚙ Model No. CT-PTS 📋 Product No. CT-95001 Product Description S Pulling Tool is a wire line service tool designed to remove RTV® subsurface devices with external fishing necks from a well. PTS is also useful as a running tool for collar stops, pack-off anchor stops, and other subsurface devices […]

Lock Mandrel

Bridge Plug Lock Mandrel ⚙ Model No. CT-LM Product Description LOCK MANDREL of COT® is a device capable of holding pressure differentials from above or below when set at any depth in a corresponding Landing Nipple Profile of matching size & type. Features & Benefits: Faster slickline service because of the retractable keys. Operator control […]

Blanking Plug

Bridge Plug Lock Mandrel ⚙ Model No. CT-BPL Product Description Blanking Plug is a device capable of holding pressure differentials from above or below when set at any depth in a corresponding Landing Nipple Profile of matching size & type. Features & Benefits: Gauge hangers for bottom hole pressure/temperature surveys Positive locator for straddle systems […]

Landing Nipple

Model No: CT-LNP-X Product No: CT-95008 Model No: CT-LNP-XN Product No: CT-95009 Model No: CT-LNP-R Product No: CT-95010 Model No: CT-LNP-RN Product No: CT-95011 X and R landing nipples are run into the well on the completion tubing to provide a specific landing location for the subsurface flow control equipment. The common internal profiles of […]