Flow Control

Lock Mandrel

Model No: CT-LM

LOCK MANDREL of COT® is a device capable of holding pressure differentials from above or below when set at any depth in a corresponding Landing Nipple Profile of matching size & type.

  • Faster slickline service because of the retractable keys
  • Operator control of locating, landing, and locking in the selected nipple
  • Any number of the identical nipples can be run with selective nipples
  • Smooth installation
  • Reduces time in the well with slickline
  • Seals on the locking mandrel protected from damage
  • Running/pulling with no interference
  • Keys provide positive location in nipple
  • Gauge hangers for bottom hole pressure/temperature surveys
  • Positive locator for straddle systems
  • Plugging under pressure
  • Almost unlimited locations for setting and locking
  • subsurface flow controls

Pulling Tool

“S” Pulling Tool

Model No: CT-PTS Product No: CT-95001 S Pulling Tool is a wire line service tool designed to remove RTV® subsurface devices with external fishing necks from a well. PTS is also useful as a running tool for collar stops, pack-off anchor stops, and other subsurface devices landed against a positive no-go. Advantages A set of three […]

Lock Mandrel

Model No: CT-LM LOCK MANDREL of COT® is a device capable of holding pressure differentials from above or below when set at any depth in a corresponding Landing Nipple Profile of matching size & type. Features & Benefits Faster slickline service because of the retractable keys Operator control of locating, landing, and locking in the selected […]

flow control accessories

Blanking Plug

MODEL NO: CT-BPL Blanking Plug is a device capable of holding pressure differentials from above or below when set at any depth in a corresponding Landing Nipple Profile of matching size & type. Features & Benefits Faster slickline service because of the retractable keys Operator control of locating, landing, and locking in the selected nipple […]

Landing Nipple

Model No: CT-LNP-X Product No: CT-95008 Model No: CT-LNP-XN Product No: CT-95009 Model No: CT-LNP-R Product No: CT-95010 Model No: CT-LNP-RN Product No: CT-95011 X and R landing nipples are run into the well on the completion tubing to provide a specific landing location for the subsurface flow control equipment. The common internal profiles of […]

Rotating Ball Seat Sub

Model No: CT-RBS Product No: CT- 91801 Rotating Ball Seat Sub eliminates the extreme impact of shearing out a ball seat at the bottom of the liner which could possibly breakdown sensitive formations. Features: Full-bore clearance after ball seat shears High-inclination wells Design that ensures that the ball is dislodged as the ball seat shears. Design […]

See Our All Products