Author:

MECH-PAC® XVI MECHANICAL HEAVY DUTY AXIAL SET SERVICE PACKER

Model No.: CT- MH 16 Product No.: CT-95327 The straight set down set service packer is designed for situation where it is not possible to rotate the string to install packer. This packer can be installed and uninstalled just by reciprocating movement of string. Heavy duty axial set service packer ideally suited for all type […]

MECH-PAC® XIII MECHANICAL RETRIEVAMATIC SERVICE PACKER

Model No.: CT- MH 13 Product No.: CT-95323 The CT-MH-13 Retrievamatic Service Packer is  a  full-opening  compression  set packer with button-type hold-down and built in unloader. It is used for conducting all types of squeeze cementing operations, for testing casing, for Formation Fracturing, or High-pressure acidizing and subsequent testing.  Advantages : Full opening for passage […]

MECH-PAC® XII MECHANICAL SET HEAVY DUTY RETRIEVABLE SERVICE PACKER

Model No.: CT- MH 12 Product No.: CT-95321 The CT-MH-12 Retrievable Packer is designed for heavy-duty service applications such as squeeze cementing, formation fracturing, and high-pressure acidizing. It features a large opening compression set design with hydraulic button-type hold down, ensuring resilience to high pressure from both above and below. Utilizing a three-element packing system, […]

ANTI ROTATIONAL AUTO FILL CEMENT FLOAT COLLAR WITH DOUBLE FLAPPER VALVE

ANTI ROTATIONAL AUTO FILL CEMENT FLOAT COLLAR WITH DOUBLE FLAPPER VALVE Completion Oil Tools manufacture Anti-rotational Auto-Fill Cement Float Collar With Double Flapper Valve. We offer with phenolic and brass ball as per the customer requirement. The flow-activated large bore auto-fill float collar includes a surge reducing and debris-tolerant PDC-drillable valve that allows low circulating rates , […]

ADJUSTABLE SUB WITH ROTATIONAL LOCK

The COT Adjustable Sub with rotational lock an in-line tubing device designed to provide orientation between two sets of tubing assemblies. Typical uses are alignment of two downhole tubing units such as dual string packers or tubing to hanger make-up. Once alignment is set, the swivel is locked in position by a series of teeth […]

HYDRAULIC SET TUBING ANCHOR CATCHER

HYDRAULIC SET TUBING ANCHOR CATCHER Model No.: CT- HTAC Product No.: CT-95905 The Hydraulic Set Tubing Anchor Catcher is a pressure actuated, fully retrievable anchor catcher designed to hold the tubing string in tension or compression. No tubing manipulation is required in order to set the anchor. Once set, bi-directional slips anchor the tubing to […]

HYDRO TRIP PRESSURE SUB

The HTPS® Hydro Trip Pressure Sub is a pressure actuated device installed in tubing string below a hydrostatically actuated tool such as a packer. It provides a method of applying pressure to activate and set the packer and then continued pressure, activate the HTPS. Packer is set by circulating a ball through packer down to […]

COT® PERMA-SET VII RETAINER PRODUCTION PACKER

The  PERMA-SET RETAINER  PRODUCTION  PACKER have  the  body  lock  ring  and setting sleeve on the lower end of the packer and incorporate an oversized seal bore in the upper end. Because size limitations prevented conversion into the top set design, all the small size CT-FAB Packers remain bottom-set. Those older versions bottom-set packers that remain […]

MECH-PAC® IX SNAP SET COMPRESSION PACKER WITH HOLD DOWN BUTTON

MECH-PAC® IX SNAP SET COMPRESSION PACKER WITH HOLD DOWN BUTTON is a retrievable set down packer featuring a bypass area through the packer and an integral unloaded. They are used as an upper packer in a single string two packer installation, for zone isolation, injection or production. FEATURES: Proven multiple packing element system. Operation of […]