COT® HYDRO-SET VII PRODUCTION PACKER Model No.: CT- HYDRO 7 Product No.: CT-95212 “CT-HYDRO-7” Hydraulic Set High Angle Production Packer was specially designed with in-built straight pull release which makes it advantageous to the operator as it nullify the requirement of high capacity rig hence improves cost savings. FEATURES : Bi-directional Barrel Slip design provide […]
Model No.: CT- SLST Product No.: CT-95703 The Snap Latch Setting Tool is a mechanical setting tool used to set the Bridge Plugs and Cement Retainers. It possess a built-in snap-latch feature which allows the setting tool to be latched to the product with set-down weight and released with up strain and rotation after setting […]
Model No.: CT- HST-R Product No.: CT-95609 Hydraulic Setting Tool is a single chamber, tubing pressure actuated setting tool used in gravel pack operations in conjunction with the Gravel Pack Crossover Tool or Hydro-Set Adapter Kit to run and set Models CT-ERD Packers and Drillable type Production Packers on tubing. FEATURES: Short and Compact design […]
Model No.: CT-WRBP-AK Product No.: CT-95605 The Model CT-WRBP-AK Wire line Adapter Kit is used to couple an electric line or hydraulic setting, tool assembly to the CT-WBP or CT-WCR. HYDRAULIC SET TUBING ANCHOR CATCHER HYDRAULIC SET TUBING ANCHOR CATCHER Model No.: CT- HTAC Product No.: CT-95905 The Hydraulic Set Tubing Anchor Catcher is a […]
Model No.: CT-MRBP-RT Product No.: CT-95602 COT CT-MRBP-RT retrieving tool for mechanical set retrievable bridge plug runs and retrieves the CT-MRBP mechanical set retrievable bridge plug. A one-quarter left turn of the tool releases the plug. The field-proven tool design minimizes the risk of its breaking away from the plug during retrieval. The running J-pins […]
Hydro-Mechanical Bridge Plug Model No.: CT- HMBP Product No.: CT-95704 The Hydro-Mechanical Bridge Plug is a drillable bridge plug, which utilizes a built-in hydraulic chamber to begin the setting process FEATURES : Hydraulic actuated mechanical set. Slim line design. Full tubing ID after releasing, if rotationally released. Tubing released by right hand rotation (primary) or […]
MECH-PAC VII TENSION SET MECHANICAL PACKER Model No.: CT- MH 7 Product No.: CT-95307 MECH-PAC VII Tension Set Mechanical Packer provides a compact, economical retrievable packer for use where a set-down type packer is impractical because of pressure requirements. Primarily Used in water flood applications, this packer can also be used for production and/or Treating […]
COT® HYDRO-SET VI PRODUCTION PACKER Model No.: CT- HYDRO 6 Product No.: CT-95208 “CT-HYDRO-6” packer was specially designed with in-built straight pull release and rotational release feature which makes it advantageous to the operator as it nullify the requirement of high capacity rig hence improves cost savings. FEATURES : Bi-directional Barrel Slip design provide high […]
Model No.: CT-MBP & CT-WBP Product No.: CT-95506 & CT-95501 Mechanical Set Bridge plug by COT® are high performance drillable bridge plugs, commonly used for zonal isolation during stimulation or cementing jobs, or for temporary and permanent abandonments. Features & Benefits: Wireline or mechanical set. Taper/Slim line design for quick wire line run. Simple conversion to […]
Control Unit (CU) and Snap Latch Stinger Sub (SSB) assembly is made-up to the work string. Model No.: CT-CU Product No.: CT-95701 (NOTE: The same assembly is used with both the standard and the flapper valve cement retainers). As the stinger sub is landed into the retainer, downward motion will engage the latch and open […]