Category: packers

COT® HYDRO-SET VI PRODUCTION PACKER

Bridge Plug COT® HYDRO-SET VI PRODUCTION PACKER ⚙ Model No. CT-HYDRO 6 📋 Product No. CT-95208 Product Description “CT-HYDRO-6” packer was specially designed with in-built straight pull release and rotational release feature which makes it advantageous to the operator as it nullify the requirement of high capacity rig hence improves cost savings. FEATURES: Bi-directional Barrel […]

Wireline/Mechanical Set Bridge Plug

Stab – In Float Collar ⚙ Model No. CT-MBP & CT-WBP 📋 Product No. CT-95506 & CT-95501 Product Description Mechanical Set Bridge plug by COT® are high performance drillable bridge plugs, commonly used for zonal isolation during stimulation or cementing jobs, or for temporary and permanent abandonments. Features: Wireline or mechanical set. Taper/Slim line design […]

Control Unit

Control Unit ⚙ Model No. CT-CU 📋 Product No. CT-95701 Product Description Control Unit (CU) and Snap Latch Stinger Sub (SSB) assembly is made-up to the work string. (NOTE: The same assembly is used with both the standard and the flapper valve cement retainers). As the stinger sub is landed into the retainer, downward motion […]

Sliding Sleeve

Sliding Sleeve ⚙ Model No. CT-CMD-NE 📋 Product No. CT-95617 Product Description Sliding Sleeve is high performance, equalizing sliding sleeves which allow communication between the tubing and annulus for circulation or selective zone­production. When desired, the sleeve can be shifted open or closed using standard wireline methods and a shifting tool. The Sliding Sleeve tool […]

Spline Expansion Joint

Spline Expansion Joint ⚙ Model No. CT-EJT 📋 Product No. CT-95615 Product Description Spline Expansion Joint is designed for packers in well completion to compensate for tubing movement during treating and injecting operations and where rotation through the tool is required. The design allows torque to be applied through the Spline Expansion Joint at any […]

Locator Tubing Seal Assembly

Locator Tubing Seal Assembly ⚙ Model No. CT- LTSA 📋 Product No. CT-95617 Product Description Locator Tubing Seal Assembly are used in single-packer, single-or dual- zone installations to provide an efficient leak proof seal between the Production Packer and production string. The Seal results from the action of Chevron or Bonded Seals that seal off […]

Upper Polished Bore Recepticle

Upper Polished Bore Recepticle ⚙ Model No. CT-PBR-U 📋 Product No. CT-95613 Product Description Upper Polished Bore Recepticle is designed for use where extreme tubing movement is anticipated because of temperature and pressure changes during treatment or production. The over all stroke of the PBR customized to best suit the requirement. When run-in it is […]

Seal Bore Extension

Seal Bore Extension ⚙ Model No. CT-SBE 📋 Product No. CT-95612 Product Description Seal Bore Extension can be run below a Production Seal Bore Packer. Seal Bore Extension by COT® is run to provide additional sealing bore when a long Locator Tubing Seal Assembly is run, to accommodate considerable tubing movement. The Seal Bore Extension […]

Mill Out Extension

Mill Out Extension ⚙ Model No. CT-MOE 📋 Product No. CT-95611 Product Description Mill Out Extension is used in installations where floating seals are required due to tubing contractions. In addition, this packer accessory provides a larger ID between a packer bore and a seal bore extension allowing a packer to be milled out. Mill […]

Retrieving Tool

Retrieving Tool ⚙ Model No. CT-RSBP-RT 📋 Product No. CT-95610 Product Description Retrieving Tool is used to retrieving Wire-line/Hydraulic Set Retrievable Seal Packers. The latch of the RTV® Tool is engaged in the Top Box Thread of the Seal bore packer which is a left hand square thread. Put Set down weight 3000-5000 Lbs on […]