Category: packer Accessories

Upper Polished Bore Recepticle

Upper Polished Bore Recepticle âš™ Model No. CT-PBR-U 📋 Product No. CT-95613 Product Description Upper Polished Bore Recepticle is designed for use where extreme tubing movement is anticipated because of temperature and pressure changes during treatment or production. The over all stroke of the PBR customized to best suit the requirement. When run-in it is […]

Seal Bore Extension

Seal Bore Extension âš™ Model No. CT-SBE 📋 Product No. CT-95612 Product Description Seal Bore Extension can be run below a Production Seal Bore Packer. Seal Bore Extension by COT® is run to provide additional sealing bore when a long Locator Tubing Seal Assembly is run, to accommodate considerable tubing movement. The Seal Bore Extension […]

Mill Out Extension

Mill Out Extension âš™ Model No. CT-MOE 📋 Product No. CT-95611 Product Description Mill Out Extension is used in installations where floating seals are required due to tubing contractions. In addition, this packer accessory provides a larger ID between a packer bore and a seal bore extension allowing a packer to be milled out. Mill […]

Retrieving Tool

Retrieving Tool âš™ Model No. CT-RSBP-RT 📋 Product No. CT-95610 Product Description Retrieving Tool is used to retrieving Wire-line/Hydraulic Set Retrievable Seal Packers. The latch of the RTV® Tool is engaged in the Top Box Thread of the Seal bore packer which is a left hand square thread. Put Set down weight 3000-5000 Lbs on […]

Hydro Trip Pressure Sub

Hydro Trip Pressure Sub âš™ Model No. CT-HTPS® 📋 Product No. CT-93601 Product Description The Model Hydro Trip Pressure Sub (HTPS®) is a pressure actuated device installed in tubing string below a hydrostatically actuated tool such as a packer. It provides a method of applying pressure to activate and set the packer and then through […]

Anchor Latch Seal Assembly

Anchor Latch Seal Assembly âš™ Model No. CT-ALSA 📋 Product No. CT-95608 Product Description Anchor Latch Seal Assembly is an anchoring and sealing device that connects the retrievable tubing string to the upper bore of the Retainer Production Packers. The latch component of the seal nipple provides positive engagement with the packer. The seal unit […]

ON-OFF TOOL

ON-OFF TOOL âš™ Model No. CT- ON-OFF 📋 Product No. CT-95603 Product Description On-Off Tool is a tubing disconnect device that has an internal blanking plug locking profile with seal bore for utilizing flow control equipment. The Overshot has a box looking up which connects to tubing string and a pin looking down off the […]

Mechanical Setting Tool

Mechanical Setting Tool âš™ Model No. CT- MST 📋 Product No. CT-95505 Product Description The Mechanical Setting Tool is designed to run and mechanically set the Cement Retainer or the Cast Iron Bridge Plug at any depth on tubing or drill pipe. Advantages: Setting cement retainers or bridge plugs on tubing or drill pipe. Squeeze […]