Model No.: CT- MST
Product No.: CT-95505
The Mechanical Setting Tool is designed to run and mechanically set the Cement Retainer or the Cast Iron Bridge Plug at any depth on tubing or drill pipe.
- Setting cement retainers or bridge plugs on tubing or drill pipe.
- Squeeze cementing
- Well abandonment
- Temporary and permanent zone isolation.
- Shear pinned to cement retainer or bridge for safety.
- Allows user to set, pressure test tubing and squeeze in single trip.
- Can quickly be configured to set cement retainers or bridge plugs.
Features & Benefits: Combined Running Tool incorporates a floating nut and bearing race system to provide easy release by right-hand rotation after the liner is hung. Once the cement job is complete, simply pick straight up to pull out of the hole. Tool will set either left or right hand mechanical set liner hangers. Will […]
Product No.: CT92604 COMPLETION OIL TOOLS® Model CT-HSTR, Setting Tool is used in Setting Rotating Liner Hanger. The Rotating Hanger Setting Tool is provided with spring loaded Rotating Dog Sub that mates with splines located in the setting collar. This dog sub transfers torque from drill string, to the liner, while in tension or compression for […]
Product No.: CT-92603 Flat Dog Packer Setting Tool is a pack off Setting Tool used in conjunction with the liner setting tool. It is used when running liner equipment with liner top pack offs. With the liner hung and the setting tool released the string is picked up to release the setting dogs. Setting weight […]
The Packer Setting Tool (CT-PST®) with Shear Indicator is a rental tool that is installed between the main body of the HR & RH Running Tool and the Handling Nipple. The Rotating Packer Setting Tool is designed to apply set down weight to Compression set liner top packers (CT-TBP, CT-MLTP-S2, CT-LTP-S2, etc.). A set of spring […]