WIRELINE SET WIDE RANGE MILLABLE BRIDGE PLUG
Posted onModel No.: CT- WBP-W Product No.: CT-95534
Category: packers
MECH-PAC® XVI MECHANICAL HEAVY DUTY AXIAL SET SERVICE PACKER
Posted onModel No.: CT- MH 16 Product No.: CT-95327 The straight set down set service packer is designed for situation where it is not possible to rotate the string to install packer. This packer can be installed and uninstalled just by reciprocating movement of string. Heavy duty axial set service packer ideally suited for all type […]
MECH-PAC® XIII MECHANICAL RETRIEVAMATIC SERVICE PACKER
Posted onModel No.: CT- MH 13 Product No.: CT-95323 The CT-MH-13 Retrievamatic Service Packer is a full-opening compression set packer with button-type hold-down and built in unloader. It is used for conducting all types of squeeze cementing operations, for testing casing, for Formation Fracturing, or High-pressure acidizing and subsequent testing. Advantages : Full opening for passage […]
MECH-PAC® XII MECHANICAL SET HEAVY DUTY RETRIEVABLE SERVICE PACKER
Posted onModel No.: CT- MH 12 Product No.: CT-95321 The CT-MH-12 Retrievable Packer is designed for heavy-duty service applications such as squeeze cementing, formation fracturing, and high-pressure acidizing. It features a large opening compression set design with hydraulic button-type hold down, ensuring resilience to high pressure from both above and below. Utilizing a three-element packing system, […]
HYDRAULIC SET TUBING ANCHOR CATCHER
Posted onHYDRAULIC SET TUBING ANCHOR CATCHER Model No.: CT- HTAC Product No.: CT-95905 The Hydraulic Set Tubing Anchor Catcher is a pressure actuated, fully retrievable anchor catcher designed to hold the tubing string in tension or compression. No tubing manipulation is required in order to set the anchor. Once set, bi-directional slips anchor the tubing to […]
HYDRO TRIP PRESSURE SUB
Posted onThe HTPS® Hydro Trip Pressure Sub is a pressure actuated device installed in tubing string below a hydrostatically actuated tool such as a packer. It provides a method of applying pressure to activate and set the packer and then continued pressure, activate the HTPS. Packer is set by circulating a ball through packer down to […]
COT® PERMA-SET VII RETAINER PRODUCTION PACKER
Posted onThe PERMA-SET RETAINER PRODUCTION PACKER have the body lock ring and setting sleeve on the lower end of the packer and incorporate an oversized seal bore in the upper end. Because size limitations prevented conversion into the top set design, all the small size CT-FAB Packers remain bottom-set. Those older versions bottom-set packers that remain […]
MECH-PAC® IX SNAP SET COMPRESSION PACKER WITH HOLD DOWN BUTTON
Posted onMECH-PAC® IX SNAP SET COMPRESSION PACKER WITH HOLD DOWN BUTTON is a retrievable set down packer featuring a bypass area through the packer and an integral unloaded. They are used as an upper packer in a single string two packer installation, for zone isolation, injection or production. FEATURES: Proven multiple packing element system. Operation of […]
MECH-PAC® VIII SNAP SET COMPRESSION PACKER
Posted onMECH-PAC® VIII SNAP SET COMPRESSION PACKER is without hold down button , which a retrievable set down packer featuring a bypass area through the packer and an integral unloaded. They are used as an upper packer in a single string two packer installation, for zone isolation, injection or production. FEATURES: Proven multiple packing element system. […]
COT® HYDRO-SET XI PRODUCTION PACKER
Posted onCT- HYDRO 11 production packer is a hydraulically set, mechanically held pressure balanced packer ideal for deep, high-pressure oil and gas production. The hydraulic setting feature combined with the pressure balance system make this tool a proven performer in multiple zone and deviated hole applications. It is hydraulically actuated and pressure balanced to offset pressure […]