Model No.: CT-MCLH-MS
Product No.:CT-90703 (NON-ROTATING)
Model No.: CT-RMCLH-MS
Product No.: CT-90704 (ROTATING)
The Mechanical SET-FLEX Liner Hanger With Integrated Packer provide a method for suspending a liner off bottom and in tension by anchoring, or hanging, and Integrated Packer with Bonded element provide an excellent seal that can be used to control annular gas migration or protect sensitive zones from well hydro-statics after cementing.
Mechanical Liner Hangers (LHM®) are set in bottom by giving 1/4 right hand turn to the string then give slack off weight on the hanger.
Features
Rotating version available to improve the cement integrity. Rotation can be provided during cementing. Specially designed pocket slips providing high load capacity and exerting uniform load on the casing minimizing the casing damages. Equipped with anti-preset feature present at both top and bottom of hanger avoiding premature setting the liner hanger. J2J® system prevents premature setting of liner hanger.
NOTE: Available in various standard and exotic metallurgy.
Benefits:
- Uniform Circulation Rate: The bypass area remains same before and after hanger setting providing uniform circulation rate during both stages.
- Molded Seal Element: Equipped with Molded Metal Seal Element with special expandable metal providing high pressure rating up to 15000 PSI , 400 DEG F with V0 validation grade. Molded Element design will not swab off Allows higher circulating rates for better mud removal Permits faster running speeds, greatly reducing tripping time.
- Guided Drag Spring: Special provision of for drag spring which is guided under the key slot protected from both the sides while employing high running in speeds.
- Equipped with Taper Roller Bearing: Equipped with tapered roller bearing which provides high load capacity during rotation.
LHM® Mechanical Set Liner Hanger
Model No.: CT-MSLH-IP Product No.: CT-90601 Model No.: CT-MDLH-IP Product No.:CT-90602 DESCRIPTION: The Mechanical Liner Hanger (LHM® ) with Integrated Packer provides a method for hanging a liner off bottom and in tension by anchoring, the top of the liner in previous casing. Features: The Mechanical Liner Hanger (LHM®) with Integrated Packer is set mechanically with the […]
Conventional Mechanical Liner Hanger
MODEL: CT-MSLH-1 Product No.: CT-90601 MODEL: CT-MSLH-2 Product No.: CT-90602 Conventional Mechanical liner can be set with either right or left- hand rotation, depending on the type of setting tool or design. Staggered cone provides maximum bypass area which results in ease of running in and circulation. Automatic J-cage permits hanger to return to the […]
Mechanical Liner Hanger Single Cone
Model No.: CT-MSLH-1 Product No.: CT-90601 Mechanical liner can be set with either right or left- hand rotation, depending on the type of setting tool or design. Staggered cone provides maximum bypass area which results in ease of running in and circulation. Automatic J-cage permits hanger to return to the run-in position, should the hanger […]
Mechanical Set-Flex Liner Hanger
Model No.: CT-MCLH-MS Product No.:CT-90703 (NON-ROTATING) Model No.: CT-RMCLH-MS Product No.: CT-90704 (ROTATING) The Mechanical SET-FLEX Liner Hanger With Integrated Packer provide a method for suspending a liner off bottom and in tension by anchoring, or hanging, and Integrated Packer with Bonded element provide an excellent seal that can be used […]
Mechanical Liner Hanger With Integrated Packer
Model No.: CT-MCLH-MS1 Product No.: CT-90707 (NON-ROTATING) Model No.: CT-RMCLH-MS1 Product No.: CT-90708 (ROTATING) The Mechanical Liner Hanger with Integrated Packer are set in bottom by giving 1/4 right hand turn to the string then give slack off weight on the hanger. Integrated Packer with Molded element […]
Mechanical SET-FLEX Liner Hanger
Model No.: CT-MCLH Product No.: CT-90701 (NON-ROTATING) Model No.: CT-RMCLH Product No.:CT-90702 (ROTATING) Completion Oil Tools® Mechanical Set-Flex Liner Hanger with J2J® latching mechanism is set by giving right-hand rotation; with fully secured slips enclosed in pocket of cone. It is available in both rotational and Non-Rotational type. […]
LHM® I Mechanical Set Double Cone Liner Hanger
Model No.: CT-MSLH-2 Product No.: CT-90602 Mechanical liner Hanger (LHM®) can be set with either right or left- hand rotation, depending on the type of setting tool or design. Staggered cone provides maximum bypass area which results in ease of running in and circulation. Automatic J-cage permits hanger to return to the run-in position, should the […]
Mechanically Set CURVED-LOCK Liner Hanger
The Mechanical Set CURVED-LOCK Liner Hanger provide a method for suspending a liner off bottom and in tension by anchoring, or hanging, the top of the liner in existing casing. The CURVED-LOCK is high performance “Kit Type” hanger which utilizes the liner pipe for a body. The Mechanical Set CURVED-lock is available in two versions: […]
J2J I Mechanical Set Liner Hanger With Integrated Packer
The Mechanical Liner Hanger With Integrated Packer of COT® provide a method for suspending a liner off bottom and in tension by anchoring, or hanging, and Integrated Packer with Bonded element provide an excellent seal that can be used to control annular gas migration or protect sensitive zones from well hydro-statics after cementing. Mechanical Liner hangers […]
Mechanical Set Liner Hanger
The Mechanical Set Liner Hanger of Completion Oil Tools®, provides a method for suspending a liner off bottom and in tension by anchoring, or hanging, the top of the liner in existing casing. The Mechanical Set Liner Hanger available in versions: a) Mechanical Set Liner Hanger (Single Cone & Non-Rotational)Product No.: CT90603 & Model No.: […]