Model No.: CT- HST-R
Product No.: CT-95609
Hydraulic Setting Tool is a single chamber, tubing pressure actuated setting tool used in gravel pack operations in conjunction with the Gravel Pack Crossover Tool or Hydro-Set Adapter Kit to run and set Models CT-ERD Packers and Drillable type Production Packers on tubing.
FEATURES:
- Short and Compact design increases the efficiency of handling, shipping, and storing as well as operations on the rig.
- Simple Construction with a minimum number of working parts, making it economical to maintain.
- Emergency rotational release.
- Innovative hydraulic setting tool.
- Advancement over existing setting tools.
- Higher tensile load capacity.
- High running torque rating.
- Straight pull / no rotation “soft” release from packer.
- Field-proven functionality .
- Hang Weight is carried on the setting tool lugs. They thread into the Packer Top Sub for increasing tensile load capacity.
- Torque may be applied through the tool and packer while running in the well.
- Hang weight is independent of the packer setting pins.
- Straight pull “Soft” release from the packer.
- Weight down while the setting pins shear is recommended.
- Two steel shear pins retain the clutch in place.
- Changes in hang weight will not cause an early release from the setting tool and a less than optimum set of the packer.
- No need to rotate off the packer to get high load capabilities.
- Simpler setting operation.
- No “slingshot” action when the packer shears free of the setting tool.
- Easy to control operation on a floating vessel.
- Easier redress of back up equipment. Drill out the two steel pins and rotate the setting tool out of the packer.