Sliding Sleeve

Sliding Sleeve is high performance, equalizing sliding sleeves which allow communication between the tubing and annulus for circulation or selective zoneproduction.

Model No.: CT-CMD-NE

Product No.: CT-95617

When desired, the sleeve can be shifted open or closed using standard wireline methods and a shifting tool. The Sliding Sleeve tool is designed such that any lock profile and compatible seal bores can be specified to accept a wide range of Wireline Locks. and accessories. The sleeve is available in “CT-CMD-NE downshift-to-open or “CT-CMU-NE” upshift-to-open versions.

The nominal working specifications for the sliding sleeve, in most cases, are burst, collapse and tensile equal to N-80 tubing, 375°F service temperature with a 1.500 psi maximum shifting differential. The Sliding sleeves have been designed in four standard materials; 4140, 9Cr-1Mo. 13% Cr and Inconel 718 for a wide range of services.

Benefits:

A specially designed Diffuser Ring made of high-strength thermoplastic is critically spaced between the flow ports and the upper packing This prevents damage to the upper packing unit during shifting by controlling the rush of fluid or gas, and lessens the likelihood of tool string damage by providing for slow equalization of high differentials.
The seal stack is manufactured from proprietary, high-strength, non-elastomeric compounds that are chemically inert and 30% stronger than commercially available materials. Rather than becoming hard and brittle.
Bonding to the metal, as is the case with elastomeric materials, our seal compound actually behaves as a lubricant, alleviating seal bonding problems.
Mill slots replace drill holes as flow ports on both the housing and the insert to allow more flow area, reduce erosion and allow higher torque and tensile strengths through the sleeves.
Locating the threaded connection inside the primary seal stack eliminates the need for O-ring thread seals and cuts the number of potential leak paths in half.
A locking, angled torque shoulder replaces traditional square shoulder to allow higher torques and reduce thread back-off.
The threat of galling is further reduced by coating critical metallic components with proprietary surface treatments. This ensures that the sleeve will be redress-able in the future, even when ordered in CRA materials. These coatings also provide corrosion and erosion resistance.
Modular design permits conversion from a Sliding Sleeve “CMD-NE” to “CMU-NE” or vice versa, by only changing the Upper and Lower Subs.

HYDRAULIC SET TUBING ANCHOR CATCHER

HYDRAULIC SET TUBING ANCHOR CATCHER Model No.: CT- HTAC Product No.: CT-95905 The Hydraulic Set Tubing Anchor Catcher is a pressure actuated, fully retrievable anchor catcher designed to hold the tubing string in tension or compression. No tubing manipulation is required in order to set the anchor. Once set, bi-directional slips anchor the tubing to […]

HYDRO TRIP PRESSURE SUB

The HTPS® Hydro Trip Pressure Sub is a pressure actuated device installed in tubing string below a hydrostatically actuated tool such as a packer. It provides a method of applying pressure to activate and set the packer and then continued pressure, activate the HTPS. Packer is set by circulating a ball through packer down to […]

SNAP LATCH SETTING TOOL

SNAP LATCH SETTING TOOL Model No.: CT- SLST Product No.: CT-95703 The Snap Latch Setting Tool is a mechanical setting tool used to set the Bridge Plugs and Cement Retainers. It possess a built-in snap-latch feature which allows the setting tool to be latched to the product with set-down weight and released with up strain […]

HST-R ROTATING HYDRAULIC SETTING TOOL

HST-R ROTATING HYDRAULIC SETTING TOOL Model No.: CT- HST-R Product No.: CT-95609 Hydraulic Setting Tool is a single chamber, tubing pressure actuated setting tool used in gravel pack operations in conjunction with the Gravel Pack Crossover Tool or Hydro-Set Adapter Kit to run and set Models CT-ERD Packers and Drillable type Production Packers on tubing. […]

WRBP-AK WIRE LINE RTV BRIDGE PLUG ADAPTER KIT

WRBP-AK Wireline RTV® Bridge Plug Adapter Kit Model No.: CT-WRBP-AK Product No.: CT-95605 The Model CT-WRBP-AK Wire line Adapter Kit is used to couple anelectric line or hydraulic setting, tool assembly to the CT-WBP or CT-WCR. WRBP-AK WIRE LINE RTV BRIDGE PLUG ADAPTER KIT MRBP-RT Bridge Plug RTV® Tool MRBP-RT Bridge Plug RTV® Tool Model […]

MRBP-RT Bridge Plug RTV® Tool

MRBP-RT Bridge Plug RTV® Tool Model No.: CT-MRBP-RT Product No.: CT-95602 COT CT-MRBP-RT retrieving tool for mechanical set retrievable bridge plug runs and retrieves the CT-MRBP mechanical set retrievable bridge plug. A one-quarter left turn of the tool releases the plug. The field-proven tool design minimizes the risk of its breaking away from the plug […]

Control Unit

Control Unit (CU) and Snap Latch Stinger Sub (SSB) assembly is made-up to the work string. Model No.: CT-CU Product No.: CT-95701 (NOTE: The same assembly is used with both the standard and the flapper valve cement retainers). As the stinger sub is landed into the retainer, downward motion will engage the latch and open […]

Sliding Sleeve is high performance, equalizing sliding sleeves which allow communication between the tubing and annulus for circulation or selective zoneproduction. Model No.: CT-CMD-NE Product No.: CT-95617 When desired, the sleeve can be shifted open or closed using standard wireline methods and a shifting tool. The Sliding Sleeve tool is designed such that any lock profile […]

Spline Expansion Joint

Spline Expansion Joint is designed for packers in well completions to compensate for tubing movement during treating and injecting operations and where rotation through the tool is required. The design allows torque to be applied through the Spline Expansion Joint at any position. Model No.: CT-EJT Product No.: CT-95615 Features: Rotationally locked at all times […]

Locator Tubing Seal Assembly

Locator Tubing Seal Assembly are used in single-packer, single-or dual- zone installations to provide an efficient leak proof seal between the Production Packer and production string. Model No.: CT- LTSA Product No.: CT-95617 The Seal results from the action of Chevron or Bonded Seals that seal off the annulus between the bore of Production Packer and […]

Upper Polished Bore Recepticle

Upper Polished Bore Recepticle is designed for use where extreme tubing movement is anticipated because of temperature and pressure changes during treatment or production. The over all stroke of the PBR customized to best suit the requirement. Model No.: CT-PBR-U Product No.: CT-95613 When run-in it is not intended for the shear ring or shear screws to […]

Seal Bore Extension

Seal Bore Extension can be run below a Production Seal Bore Packer. Seal Bore Extension by COT® is run to provide additional sealing bore when a long Locator Tubing Seal Assembly is run, to accommodate considerable tubing movement. Model No.: CT-SBE Product No.: CT-95612 The Seal Bore Extension has the same seal bore size as the […]

Mill Out Extension

Mill Out Extension is used in installations where floating seals are required due to tubing contractions. Model No.: CT-MOE Product No.: CT-95611 In addition, this packer accessory provides a larger ID between a packer bore and a seal bore extension allowing a packer to be milled out. Mill Out Extension of Completion Oil Tools® is also […]

Retrieving Tool

Retrieving Tool is used to retrieving Wire-line/Hydraulic Set Retrievable Seal Packers. Model No.: CT-RSBP-RT Product No.: CT-95610 The latch of the RTV® Tool is engaged in the Top Box Thread of the Seal bore packer which is a left hand square thread. Put Set down weight 3000-5000 Lbs on the Packer, may be slickly rotate to […]

Hydro Trip Pressure Sub

Model No.: CT-HTPS® Product No.: CT-93601 The Model Hydro Trip Pressure Sub (HTPS®) is a pressure actuated device installed in tubing string below a hydrostatically actuated tool such as a packer. It provides a method of applying pressure to activate and set the packer and then through continued pressure, activate the Hydro Trip Sub. Packer […]

Anchor Latch Seal Assembly

Anchor Latch Seal Assembly is an anchoring and sealing device that connects the retrievable tubing string to the upper bore of the Retainer Production Packers. Model No.: CT-ALSA Product No.: CT-95608 The latch component of the seal nipple provides positive engagement with the packer. The seal unit maintains the pressure integrity of the connection. The […]

ON-OFF TOOL

On-Off Tool is a tubing disconnect device that has an internal blanking plug locking profile with seal bore for utilizing flow control equipment. Model No.: CT- ON-OFF Product No.: CT-95603 The Overshot has a box looking up which connects to tubing string and a pin looking down off the Stinger which connects to the packer. […]

Mechanical Setting Tool

Model No.: CT- MST Product No.: CT-95505 The Mechanical Setting Tool is designed to run and mechanically set the Cement Retainer or the Cast Iron Bridge Plug at any depth on tubing or drill pipe. Advantages: Setting cement retainers or bridge plugs on tubing or drill pipe. Squeeze cementing Well abandonment Temporary and permanent zone […]

See Our All Products